Pool Resurfacing in Phoenix, AZ - Pebble Tec Elite Builder - Since 1957
I needed a complete pool/spa PebbleTec resurface. I called PebbleTec and they said the only company they recommend is Swimming Pool Service and Repair. I had Bert come over and give me an estimate. From my first meeting until the finished product, Bert was outstanding! The technician, Don, is diligent and will make sure things are done right. I went with a Pebblesheen and accent tile. All done with incredible craftsmanship. Highly recommended!!" - Don C. from Chandler -Yelp Review-
Every Swimming Pool Service & Repair supervisor has over twenty years of hands-on pool resurfacing experience in the Phoenix metro. We are not a pool builder -- we specialize in resurfacing and repairing existing pools. Walking onto a 25-year-old pool with unknown plumbing, cracked plaster, calcium deposits from Phoenix hard water, and previous bad work takes a different kind of experience than building from a blank slab. We have 69 years of that experience.
Our core resurfacing crews handle your project from start to finish. During peak season, there is overflow, we lean on decade-long trade partnerships to keep timelines tight without sacrificing quality. We own our land, our warehouses, our trucks, and our inventory -- no debt, no landlord, no lender telling us to cut corners. When we give you a resurface estimate, the price is real. We seldom do change orders. If we find an unexpected problem mid-job -- a cracked pipe under the surface, a failing drain, rebar that needs attention -- we fix it and absorb the cost. That is how we have survived since 1957, and it is why 80% of our work comes from repeat customers and referrals.
Swimming Pool Service & Repair has been resurfacing pools across the Phoenix Valley since 1957. Three generations. 69 years. Thousands of pools resurfaced. We are certified Pebble Tec Elite Builders, not a badge you can buy, it is earned through verified installation volume, training, and quality standards.
Pool resurfacing in Phoenix typically costs $6,500 to $15,000 for a standalone resurface, and $12,000 to $25,000 when combined with new waterline tile and coping. Every pool is different, which is why we never quote over the phone. We come out, look at the pool, and give you a real number. No sticker prices, no change orders mid-job, no surprises.
We are licensed by the Arizona Registrar of Contractors (ROC 048408, 070761, 173638), insured, and we carry a full warehouse of Pebble Tec and Pebble Sheen material for fast turnaround and precise color matching across 30+ colors.
How Much Does Pool Resurfacing Cost in Phoenix?
Pool resurfacing in Phoenix typically costs $6,500 to $15,000 depending on pool size, surface material, and condition.
Here is what to expect for an average-sized backyard pool:
Standard Plaster Resurface: $4,500 to $7,000. White or colored marcite plaster applied over the existing pool shell. The most affordable option. Lasts 7 to 12 years in Arizona -- shorter than pebble finishes because Phoenix hard water and UV degrade plaster faster. Best for budget-conscious homeowners or rental properties where appearance is secondary to function.
Pebble Sheen or Quartz Finish: $6,500 to $12,000. Smoother pebble aggregate (Pebble Sheen) or ground quartz provides a refined look and better durability than plaster. Lasts 15 to 20 years. Pebble Sheen is the most popular choice for Phoenix pool resurfacing -- it has the durability of Pebble Tec with a softer, gentler texture underfoot. Comfortable for bare feet and swimsuits.
Pebble Tec Finish: $6,500 to $12,000. Premium natural pebble aggregate from Pebble Technology International. The most durable pool surface available -- lasts 15 to 25 years in Arizona's extreme climate. Textured, slip-resistant, and available in 30+ color blends. As certified Pebble Tec Elite Builders, we install it to manufacturer specifications with full warranty backing. We carry a full warehouse of material so there is no waiting on suppliers and we can color-match precisely.
Resurface + Tile + Coping: $12,000 to $25,000. Combining a resurface with new waterline tile, coping stone replacement, and drain work. This is the most common combination - Phoenix homeowners save 15 to 20% doing everything at once versus separate projects. About 50% of our resurface customers end up adding tile, coping, or equipment upgrades once they see the possibilities during their free estimate. That turns a resurface into a pool remodel, and we handle the entire scope under one project manager and one warranty.
The exact resurface cost depends on your pool's size (surface area in square feet), the finish material you choose, surface prep needed, and whether we find plumbing or structural issues underneath. Every estimate includes a free on-site inspection and exact written pricing -- not a range pulled from the internet.
Request your free pool resurfacing estimate or call (602) 267-7203.
Pebble Tec vs Plaster -- Which Pool Surface Is Best for Phoenix?
This is the most common question Phoenix homeowners ask. Here is the honest answer based on 69 years of resurfacing pools in the Valley:
Pebble Tec uses natural pebble aggregate mixed into the surface, creating a textured, durable finish that handles Phoenix hard water, 115-degree summers, and intense UV better than any alternative. Lasts 15 to 25 years. Slip-resistant. Available in 30+ colors -- popular Phoenix choices include Tahoe Blue, Caribbean Blue, White Pearl, Blue Lagoon, Sandy Beach, and Midnight Blue. The color you see in a showroom looks different with water and sunlight, so we show you completed pools in the Valley with your chosen color before you commit.
Pebble Sheen is the smoother variant of Pebble Tec -- same durability, smaller pebbles, softer feel underfoot. Same 15 to 20 year lifespan. Lower price point than Pebble Tec. This is what we recommend for families with young children or anyone who prefers a gentler texture. Same color range as Pebble Tec.
Quartz (Ultra Poz, Hydrazzo) is ground quartz aggregate that creates a smooth, sparkling finish. Good middle ground between plaster and pebble. Lasts 12 to 18 years. Moderately priced. Less textured than Pebble Tec but more durable than standard plaster.
Standard Plaster is traditional white marcite cement. Most affordable option upfront, but only lasts 7 to 12 years in Arizona. Stains faster, etches faster, and shows calcium buildup sooner than pebble or quartz. You will resurface a plaster pool twice in the time a single Pebble Tec application lasts.
Our recommendation: For any Phoenix homeowner who plans to stay in their home more than 5 years, we recommend Pebble Tec or Pebble Sheen. The higher upfront cost is offset by the longer lifespan -- you resurface once instead of twice. We do not recommend paint or epoxy coatings for Arizona pools. They peel within 2 to 3 years in our sun and are not worth the money at any price.
The Pool Resurfacing Process - What to Expect
Most pool resurfacing projects in Phoenix take 5 to 10 days from drain to swim-ready. Here is exactly what happens:
Free On-Site Estimate and Inspection
Your resurface starts with a free on-site consultation. We inspect the surface condition, tile, coping, equipment, plumbing, and structural integrity of your pool. Then we give you a written estimate with exact pricing. We bring material samples so you can see Pebble Tec and Pebble Sheen colors in your pool's actual lighting conditions -- not a showroom. If you need more than a resurface, we tell you. If you only need a resurface, we tell you that too. No upselling, just honest assessment.
Pool Drain and Surface Removal
We drain your pool to the sewer clean-out in accordance with Arizona's pool drain ordinance. Once drained, our crew chips out the existing interior surface -- old plaster, quartz, or worn Pebble Tec -- using jackhammers and air chisels. This exposes the gunite or shotcrete shell underneath. If your waterline tile is being replaced, we remove it during this phase. Phoenix pools built in the 1980s and 1990s often have hidden plumbing issues under the surface. If we find a problem, we fix it, that is on us. This phase typically takes 1 to 2 days.
Surface Preparation and Repairs
We prep the exposed shell -- repairing any cracks, patching spalled areas, addressing rebar exposure, and creating the proper surface profile for the new finish to bond to. If plumbing repairs are needed, they happen now. If the main drain, skimmer, or return fittings need replacement, we handle it. This is where 69 years of experience matters most -- our crews know what to look for and what to fix before it becomes a problem two years from now.
New Surface Application
We apply your chosen finish - Pebble Tec, Pebble Sheen, Ultra Poz quartz, or plaster -- using a pressurized spray nozzle, then hand-trowel the surface smooth. For pebble and quartz finishes, this is a two-coat process: bond coat followed by the finish coat. Our crews have applied thousands of Pebble Tec surfaces across the Valley. Material comes from our own warehouse -- no waiting on suppliers, no delays, and precise color matching because we control the inventory.
Pool Fill
After the new surface is applied, we fill the pool over 12 to 30 hours depending on size. Do not stop the water once filling begins until it reaches the middle of the waterline tile or the skimmer throat. Interrupting the fill can cause discoloration or imperfections in the new surface. We coordinate timing between the surface application and the fill to protect your finish during this critical curing window.
Pool Startup - We Do This Ourselves
This is where we separate ourselves from some pool resurfacing company in the Valley. We perform our own pool startups on every resurface. We balance all water chemistry, mechanically start up pumps and filters, and verify everything runs correctly. Why does this matter? Improper startup chemistry is the number one cause of surface failure and voided warranties. Some companies finish the surface, hand you a hose, and walk away. When the startup goes wrong, they blame "chemical failure" and deny your warranty claim. We control the entire process - surface to startup - so there is zero gap in accountability. You get surface care guidelines and a startup chemistry report. You do not pay until the job is complete and you are satisfied with the quality. We accept credit cards -- not because we have to, but because we are confident enough in our work to give you that extra layer of protection.
How Do You Know When Your Pool Needs Resurfacing?
Here are the signs Phoenix homeowners call us about:
Rough, sandpaper-like texture. The surface aggregate is exposed and rough on feet and swimsuits. This is the most common reason for pool resurfacing in Arizona -- Phoenix hard water and UV erode the smooth finish over time, leaving an abrasive surface that cuts feet and tears swimsuits.
Staining that will not come off. Brown, green, or blue-green mineral stains that chemical treatments cannot remove. Once staining penetrates the surface, no amount of acid washing will fix it permanently. Phoenix well water and mineral-heavy city water accelerate this.
Visible cracks or delamination. The surface is separating from the pool shell underneath. This allows water behind the surface, accelerating failure and potentially causing structural issues. Patching works temporarily but resurfacing is the permanent fix.
Plaster dust in the water. White powder constantly settling on the bottom is the surface literally dissolving. Your pool is losing material every day, and the rougher it gets, the harder it is to keep chemically balanced.
Surface is 10+ years old (plaster) or 20+ years old (pebble). Even without visible problems, aging surfaces become increasingly porous, harder to keep chemically balanced, and less efficient at retaining water. If you are patching the same spots every season, resurfacing is cheaper in the long run.
Not sure if your pool needs a resurface or just a repair? Call (602) 267-7203 for an honest assessment. We will tell you what it actually needs -- even if that means a $350 pebble patch instead of a $10,000 resurface.
Installing Pebble Tec in Swimming Pool
Should You Resurface During a Pool Remodel?
If you are planning a pool remodel in Phoenix, yes -- resurfacing is almost always part of the scope. Here is why:
The pool is already drained. Every remodel requires draining. Since you are already down, adding the resurface saves a separate drain-and-fill cycle -- typically $500 to $1,000 in water and labor.
Tile and coping work requires it. Removing waterline tile damages the surface below. You will need to resurface that area anyway -- might as well do the whole pool while it is drained and prepped.
New equipment deserves a clean surface. Upgrading your pool pump, filter, and plumbing while keeping a deteriorating surface is like putting a new engine in a car with a rusted frame. Our equipment team coordinates with the resurface crew so everything goes in at once.
Combined pricing saves money. Our resurfacing price during a remodel is lower than standalone because labor and equipment are already mobilized. Most homeowners save 15 to 20% on the resurface portion by bundling.
50% of our resurface customers end up adding at least one more service to the project - usually waterline tile, coping, or a variable-speed pump. That is why a resurface estimate from us includes a full pool assessment. We tell you what is needed, what is optional, and what the savings would be for doing it all at once. No pressure, just honest numbers.
Why Choose Swimming Pool Service & Repair for Pool Resurfacing?
Certified Pebble Tec Elite Builder. This certification is earned through verified installation volume, factory training, and ongoing quality standards. It means we install Pebble Tec and Pebble Sheen exactly to manufacturer specifications, with full warranty backing from Pebble Technology International. When you call Pebble Tec and ask who they recommend in Phoenix, they send people to us.
69 years in Phoenix. Swimming Pool Service & Repair was founded in 1957. Three generations of the same family. We have resurfaced thousands of Phoenix pools - every size, every finish, every problem Arizona throws at a pool surface. That tenure is not just a number. It means our estimates are more accurate, our crews have seen every surprise, and we know which materials hold up in this climate and which do not.
Crews held to our standard. Our core resurfacing crews have been with us for years - this is their career, not a gig. When seasonal demand spikes, we lean on decade-long trade partnerships to keep timelines tight. Every crew on your project meets the same quality bar we have maintained since 1957. No exceptions, no shortcuts.
Three Arizona ROC licenses (#048408, #070761, #173638). Licensed, bonded, insured. We pull permits when required and do the work to code. A+ BBB rated. BuildZoom Top 13% of Arizona contractors.
Full-service capability. If the resurface reveals tile damage, plumbing issues or aging pool equipment, we handle everything. One company, one schedule, one point of accountability. From a $350 pebble patch to a $65,000 complete pool renovation, same crews, same standards.
Pool deck resurfacing? We partner with Imagine AZ (https://www.imagineaz.com) for deck work. We handle everything in the pool shell -- they handle everything outside it. Mutual referral, seamless coordination. Direct to customer pricing.
What Areas Do We Service?
We resurface pools across the entire Phoenix Valley -- from luxury estates in Scottsdale and Paradise Valley to family pools in Phoenix, Tempe, Mesa, Chandler, Gilbert, Fountain Hills, Cave Creek, Carefree, Ahwatukee, Glendale, Peoria, Goodyear, Surprise, Queen Creek, and San Tan Valley. Whether your pool was built in 1975 or 2015, it is aging under the same Arizona sun - and we have been resurfacing pools like yours for 69 years. See all areas we serve.
"Andy and company were extremely professional, always available and just awesome to deal with. We got our pool resurfaced with Pebble Sheen and had our deck rebuilt & painted. Also went to their office to pick out new pool tiles and the staff were super helpful. Their After Sales service was also excellent. (thanks Andy!) Would recommend to anyone in the future. The experience was absolutely above and beyond what anyone could ask for. We love our new pool. Thank you Swimming Pool Service & Repair!"
- JT T. - Yelp Review
Pool remodeling at its best! Highly recommend Swimming Pool Service & Repair (SPSR). My biggest compliment is craftsmanship! SPSR staffs a team who knows their trade and takes pride in the smallest details. At every stage of the remodel (demolition, prep, resurface, and startup) we seemed to have the "A" team.
- David B. from Scottsdale - Yelp Review
Pool Resurfacing Questions Phoenix Homeowners Ask
How much does pool resurfacing cost in Phoenix? Pool resurfacing in Phoenix typically costs $6,500 to $15,000 depending on pool size, surface material, and condition. A standard Pebble Tec or Pebble Sheen resurface for an average backyard pool runs $8,000 to $12,000. Factors that affect price include surface prep work, tile and coping condition, drain replacement, and whether equipment upgrades are needed. We provide free on-site estimates with exact pricing - no ballpark guesses over the phone, because every pool is different.
What is the difference between Pebble Tec and plaster? Pebble Tec uses natural pebble aggregate mixed into the surface, creating a textured, durable finish that lasts 15 to 20 years. Traditional white plaster is smooth but typically lasts only 7 to 12 years and shows stains, etching, and discoloration faster -- especially in Phoenix hard water. Pebble Tec costs more upfront but saves money long-term because you resurface less often. Pebble Sheen is a smoother variant of Pebble Tec with smaller pebbles for a softer feel underfoot. After 69 years of resurfacing pools in the Valley, we recommend Pebble Tec or Pebble Sheen for any pool owner who plans to stay in their home more than 5 years.
How long does pool resurfacing last? Pebble Tec and Pebble Sheen surfaces last 15 to 20 years with proper water chemistry. Standard plaster lasts 7 to 12 years. Quartz finishes fall in between at 10 to 15 years. Phoenix hard water and intense UV exposure are harder on pool surfaces than most climates, so water chemistry matters more here. We see pools that were properly maintained still looking great at 18 years, and neglected pools needing resurfacing at 8. We include care instructions with every resurface job.
How long does it take to resurface a pool? A typical pool resurface takes 5 to 7 business days from drain to fill. Day 1 is draining. Days 2 to 3 are surface prep -- chipping, cleaning, and bond coat. Days 3 to 4 are the new surface application. Then the pool fills for 24 to 48 hours and we do a startup chemistry balance. You can swim within 7 to 10 days of starting. Larger pools, full remodels with tile and coping, or pools with structural repairs take longer. We give you a specific timeline at your free estimate.
What Pebble Tec colors are available? Pebble Tec offers 30+ colors ranging from light blues and whites to deep ocean blues and earth tones. Popular choices in Phoenix include Creme de Menthe, Blue Lagoon, and Desert Gold. Pebble Sheen has a similar range with a smoother finish. The color you see in the showroom will look different with water and sunlight -- we help you pick by showing completed pools in the Valley with your chosen color so you know exactly what to expect. We carry a full warehouse of Pebble Tec and Pebble Sheen materials with strong color-match ability.
Who does pool resurfacing near me in Phoenix? Swimming Pool Service and Repair has been resurfacing pools across the Phoenix metro since 1957 -- 69 years and three generations. We serve Phoenix, Scottsdale, Tempe, Mesa, Chandler, Gilbert, Paradise Valley, Fountain Hills, Cave Creek, Carefree, Ahwatukee, Glendale, Peoria, Goodyear, Surprise, Queen Creek, San Tan Valley and surrounding areas. We are licensed (ROC 048408, 070761, 173638), insured, and certified Pebble Tec applicators. Call (602) 267-7203 for a free on-site estimate.
What is the best pool resurfacing material? For Phoenix pools, Pebble Tec is the best overall choice -- it handles our hard water, UV exposure, and extreme heat better than plaster, quartz, or fiberglass coatings. Pebble Sheen is the best choice if you want the durability of Pebble Tec with a smoother feel. Standard plaster is the lowest cost but needs replacing twice as often. Quartz aggregate is a mid-range option. We do not recommend paint or epoxy coatings -- they peel within 2 to 3 years in Arizona sun.
What does the pool resurfacing process look like? Step 1: We inspect your pool and give you a free written estimate. Step 2: We schedule your resurface (typically within 2 to 3 weeks). Step 3: We drain your pool and prep the existing surface by chipping and cleaning. Step 4: We apply bond coat and then the new Pebble Tec or Pebble Sheen surface. Step 5: We fill the pool over 24 to 48 hours. Step 6: We perform our own pool startup -- we balance your water chemistry ourselves because improper startup chemistry is the number one cause of surface failure and voided warranties. Some companies finish the surface, hand you a hose, and walk away. We control the entire process from surface to startup so there is zero gap in accountability. Step 7: You swim. You do not pay until the job is complete and quality is verified.
Who is the best pool resurfacing company in Phoenix? Swimming Pool Service and Repair has been the Valley's trusted pool resurfacing company since 1957. Three generations, 69 years, thousands of pools resurfaced. We are certified Pebble Tec and Pebble Sheen applicators, licensed by the Arizona Registrar of Contractors (ROC 048408, 070761, 173638), and we carry a full warehouse of materials for fast turnaround and precise color matching. Our core crews handle your project, and during peak season we lean on historic trade partnerships to keep timelines tight without sacrificing quality. We perform our own pool startups so your warranty is never at risk from a third party. You do not pay until the job is complete and you are satisfied. We accept credit cards -- not because we have to, but because we are confident enough in our work to give you that layer of protection. Call (602) 267-7203 or visit poolfix.com for a free estimate.
Ready to resurface your pool? Call (602) 267-7203 or request a free estimate online. We show up, look at the pool, and give you a real price -- not a number pulled from the internet. Three generations. 69 years. Licensed, bonded, insured, and certified Pebble Tec Elite Builders. You do not pay until the job is done and quality is verified.