Phoenix Pool Remodeling & Resurfacing Since 1957
Pool Remodeling & Resurfacing in Phoenix
Phoenix is where Swimming Pool Service & Repair was born. In 1957, we opened our doors right here in Central Phoenix, and for nearly seven decades, we’ve been the team that Arcadia, Encanto, Biltmore, and North Central homeowners trust when their pools need expert care. We’ve watched this city grow from a desert community of to a metropolitan area of 1.6 million, and we’ve been resurfacing pools through every era of that growth.
If you own a home in Phoenix, chances are your pool is older than pools in newer suburbs. Many of the ranches built in the 1950s, 60s, and 70s in Arcadia, Encanto, and North Central have original or near-original pools. That’s good news: it means your pool has history and character. That’s also challenging news: it means your pool surfaces are likely on borrowed time. The original plaster that was installed in the 1960s and 70s has a lifespan of 20-30 years. If your pool hasn’t been resurfaced since then, it’s time.
We understand Phoenix pools at every stage of their lives, from the historic Biltmore estates to the Mid-Century Modern ranches of Arcadia to the growing North Phoenix communities that expanded in the 1980s and 90s. Whatever era your Phoenix home comes from, we know what your pool needs.
I Couldn't be happier with the job they did replacing waterline tile as well as tile on a negative edge, raised spa. -L.H. from Phoenix- Yelp Review
Why Phoenix Pools Need Specialized Care
Phoenix presents unique challenges for pool ownership. Our climate is extreme: intense sun exposure, temperature swings, and mineral-heavy water that’s among the hardest in the Southwest. Most Phoenix municipal water tests at 300+ ppm of total dissolved solids, compared to a national average of 150 ppm. Hard water accelerates surface deterioration, shortens equipment life, and creates stubborn calcium buildup that regular maintenance can’t fully prevent.
Beyond water chemistry, Phoenix’s geological conditions matter too. Much of Phoenix sits on caliche layers, hard mineral deposits that can cause soil expansion and contraction. This puts structural stress on pool basins, especially in older neighborhoods like Encanto and parts of Central Phoenix where homes were built on less-developed foundations. We’ve spent 69 years learning to work with these conditions, not against them.
The Arcadia, Encanto, and Biltmore pools we service today are often 50+ years old. That means the structural integrity of the basin itself may need attention before a fresh surface coat can truly solve the problem. Our team evaluates each pool for underlying issues that a simple resurface won’t fix, and we’ll tell you honestly whether your pool needs more comprehensive work.
Phoenix Neighborhoods We Serve
Every neighborhood is different. Case in point -
Arcadia: Home to some of Phoenix’s most desirable Mid-Century Modern architecture, Arcadia was developed primarily in the 1950s-70s. These homes feature period pools that are now 50+ years old. Many Arcadia homeowners are discovering that resurfacing their pools with modern finishes like Pebble Tec, aggregate systems, or premium plaster. It's the most cost-effective way to extend pool life another 25 years while updating their backyard aesthetic.
Encanto: This historic neighborhood just south of downtown Phoenix features 1920s-1950s homes with equally vintage pools. Encanto pools often require more structural assessment than newer suburban pools. Many have compromised plaster, calcium buildup from decades of hard water, and aging equipment. We’ve become the go-to team for Encanto homeowners tackling comprehensive pool renovation projects.
Biltmore: The Biltmore corridor and surrounding upscale neighborhoods feature a mix of 1970s-80s estate homes with larger pools that demand premium finishes and careful project management. These are often sophisticated properties where pool work must be coordinated with broader landscape and home renovation plans.
North Central: Rapidly growing neighborhoods in North Phoenix (between Camelback and Northern, east of Central) feature a mix of 1980s-90s homes. These pools are entering their first or second resurface cycle. Many North Central homeowners are looking to upgrade builder-grade original plaster to more durable, aesthetically pleasing finishes.
Central Phoenix: The geographic and historic heart of the city, Central Phoenix encompasses diverse neighborhoods with homes from every era. Our shop is located right here, and this is home turf for our team. We know Central Phoenix’s water conditions, soil composition, and neighborhood preferences intimately.
Common Pool Problems in Phoenix
Aged Plaster & Surface Deterioration: If your Phoenix pool was built or last resurfaced in the 1980s or earlier, your plaster is likely chalking (rubbing off), staining, or cracking. Phoenix’s relentless sun and hard water accelerate this process. The original white plaster that was standard in the 60s and 70s becomes porous and weak over time. We regularly resurface Phoenix pools that are shedding plaster and developing rough surfaces that make traditional plaster feel uncomfortable to swim in.
Calcium Buildup & White Deposits: Phoenix’s hard water (often 300-350 ppm) means calcium scale forms on tile, equipment, and pool walls faster than in other parts of the country. If you’re seeing white crusty deposits around your waterline or on your tile, that’s calcium carbonate, a signature Phoenix pool problem. This buildup not only looks bad but shortens equipment life, reduces circulation efficiency, and can damage tile and grout over time.
Equipment Corrosion & Failure: Hard water doesn’t just affect surfaces; it destroys equipment. Pump seals, filter media, heater tubes, and chlorinator cells all have shorter lifespans in Phoenix. We regularly see 15-20 year old equipment that’s basically at the end of its life. Not due to poor maintenance, but due to hard water corrosion. If your equipment is from the 1990s or early 2000s, equipment replacement or major servicing is likely in your future.
Structural Settlement & Cracks: Older Phoenix neighborhoods, particularly Encanto and parts of Arcadia, sit on caliche-laden soils that can shift seasonally. This puts stress on pool basins. We’ve seen pools where settlement cracks appear in the plaster even after recent resurfacing, the underlying basin is moving slightly each year. Diagnosing whether you need just surface repair or deeper structural work is part of our expert assessment.
Tile Degradation: Original pool tile from the 1960s-80s often has grout that’s deteriorated, tile that’s cracked or loose, and a waterline that accumulates years of calcium and algae staining. Phoenix pools frequently need tile replacement or professional cleaning as part of a comprehensive resurfacing project.
Our Expertise in Phoenix Pools
We’re not just a pool company that happens to be in Phoenix. We’re a Phoenix institution with 69 years of local experience. This matters because pool knowledge is contextual. Understanding Phoenix pools means understanding hard water chemistry, local soil conditions, the specific age profiles of homes in different neighborhoods, and the aesthetic preferences that Phoenix homeowners value.
Our credentials reflect our commitment to quality. We hold a Pebble Tec Elite Builder Certification, the highest tier of certification from Pebble Technology International, the company that invented the aggregate pool finish technology that many Phoenix homeowners now prefer. We hold multiple ROC Licenses (#048408, #070761, #173638) in Arizona, covering pool construction, repair, and equipment work. And we maintain a BBB A+ Rating, recognized as a Pebble Tec Elite Builder, a standard we’ve upheld through decades of delivering on our promises.
When you call us about your Phoenix pool, you’re getting a team that understands not just how to resurface or repair, but why your specific pool in your specific Phoenix neighborhood needs what it needs. That’s the kind of expertise that comes from nearly 70 years of showing up, listening, and doing the work right.
Pool Resurfacing & Remodeling Services
Whether your Phoenix pool needs a complete resurface, selective repairs, equipment upgrades, or a full remodeling transformation, we handle every scope of work. Learn more about our services:
Pool Resurfacing Services – Plaster, Pebble Tec, aggregate finishes, and tile work
Pool Remodeling – Complete backyard transformation, features, and upgrades
Pool Equipment Repair & Replacement – Pumps, filters, heaters, and chlorination systems
Pool Tile Cleaning & Replacement – Waterline restoration and tile work
Every Phoenix pool is unique. We’ll assess your specific situation, explain your options, and work with you to create a plan that fits your budget and timeline.
69 Years. BBB A+ Rated. Phoenix Born and Raised.
Swimming Pool Service & Repair has been resurfacing, remodeling, and repairing Phoenix pools since 1957. We are not a franchise. We are not a startup. We are 4 generations of family, locally owned, BBB A+ rated, ROC licensed pool company with nearly seven decades of Phoenix-specific experience. Certified Pebble Tec Elite Builder. We know the soil, the water, the heat, and we know your neighborhood — because we have been working in it longer than most of our competitors have been alive.
Frequently asked questions
Ready to restore your Phoenix pool?
Call us today at (602) 267-7203 for a free consultation. We’ll assess your pool’s current condition, discuss your options, and create a plan that works for your home and budget.
Swimming Pool Service & Repair
2142 E Jefferson St, Phoenix, AZ 85034
Serving Phoenix since 1957